Single Shot Loader designed for Weirhauch HW110 and HW44. The unit inserts into the breech by lifting the magazine loading lever. Once in place it cannot be removed without lifting the lever and will slide in and out to allow firing and loading. An integral O ring holds the pellet in place (30mm x 2mm) so the loader can be used at any angle without the pellet dropping out. The O ring is positioned to cause the minimum distortion to the pellet during target and HFT use, more grip can be added if required by filing the groove over the pellet hole. Please message me if you require the pellet to be held firmly for field use when ordering.
This item is 3D printed to high quality using tough heat resistant plastic. The black Nylon versions are high quality made by laser sintering.
LEFT HANDED are for left handed air rifles and HW44 pistols, where the cocking lever is on the left side of the gun. Left handed loaders are not compatible with standard right handed guns. If you want a left handed one in a different colour please let me know when ordering.
For guns where the cocking lever has been reversed a very small notch will need to be filed from the loader so it can pass the magazine stop. Order a loader that is the same side as your lever.