Improved single shot loading tray for Daystate guns.
Multishot guns only, this will not fit a single shot gun (and is not needed).
Better height so pellet loads smoothly
Increased height at one side to prevent pellet roll through
Reversible
Magnetic location
Bright colours to avoid loss
All calibres available
These loading trays are designed to provide easier loading and less pellet distortion than the manufacturer supplied ones. They have one side raised to avoid the pellet rolling through. They contain four magnets so can be used for loading pellets from the left or right hand side of the gun.
Three sizes are Available:
Standard (narrowest)
Huntsman - tested
Merlyn - tested
Mk3 - tested
Mk4 Target - tested
Mk4 Airwolf - tested
Mk4 Panther
Air Ranger - tested
Griffen - tested
Wolverine - tested
Wolverine 2 - tested
X2
Pulsar
Pulsar - tested
Red Wolf - tested
Wolverine R (tight) - tested
Renegade (widest)
Renegade - tested
Wolverine R (looser) - tested
0.25 and 0.30 calibre are available and made to order upon request and may take a couple of days to dispatch. The 0.30 does not leave much room between the base and pellet slot so must be handled with more care than the others.
If another colour is required please message me before ordering.
These items are 3D printed using ABS and the magnets are attached with industrial grade high viscosity slow setting superglue.
Great bit of kit. Makes it so much easier to load especially with 177.
Works really well but needed bit of filing to get pellet to load easily. Only took me a few minutes and very easy but was very stiff before I did so.
Well worth the effort and good value. So much easier to load a pellet especially 177.
J
John Wray
Single shot loader for Daystate Redwolf.
Brilliant piece of equipment. Much better than the original single shot loader from Daystate.
